Electric Servo Controls for Rotary Valves Series V

About Electric Servo Controls for Rotary Valves Series V

Electric Servo Controls for Rotary Valves Series V200

ELECTRIC SERVO CONTROLS FOR ROTARY VALVES. SERIES V 200, M 1000.

MAIN CHARACTERISTICS : Series 1000 and 2000 three and four-way valves with butterfly rotor or circular segments can mount two types of electric servo controls. They are equipped with travel stop microswitches designed to the electrical power supply and with clutch devices that permit the valves to be manually actuated. Both motor are equipped with an auxiliary microswitch. The servo controls that available for the various valve sizes listed in the overall dimension table (table3).

MANUAL CONTROL AND OPERATION : All electrical servo controls achieve on/off type adjustment (with SPDT electric control) or modulating adjustment (type P adjustment with step by step motors). Maximum angular travel is 90° (fixed standard setting of the travel stop microswitches). During manual adjustment the position of the gate is controlled by the pointer of the adaptor at graduated label on the valve body. Manual adjustment is performed as follows: For the ON/OFF version: just press the release pus-button placed above the servomotor (see Fig.3). For V 200 rotate the manual control knob on the servomotor or, as an alternative, the handle placed between the servomotor and the valve itself. For M 1000 rotate the manual control handle placed between the servomotor and the valve itself. These are no manual control for the MODULATING version excepted by removing the servomotor from the valve and controlling the valve using its own manual knob. This konb also works as an adaptor with the sermotor. NOTE: the servomotor must not be installed with its front facing down.

Advanced Automation for Rotary Valves

Series V Electric Servo Controls offer robust performance for rotary valve automation in industrial flow control, handling pressures up to 10 bar and suitable for valve sizes DN25 to DN300. Its servo motor-based actuation ensures accurate control and low noise operation, enhancing process efficiency and reliability. Built from a cast aluminum body and stainless steel actuator parts, these units ensure longevity and resistance to harsh environmental factors.


Flexible Installation and Operation

With ISO 5211 flange mounting, threaded, or custom connection options, the Series V adapts easily to different valve setups. The modular, compact design simplifies integration into new or existing systems. Remote operation is supported through advanced control panel integration, facilitating easy monitoring and command even from a distance. Manual override and multiple voltage options increase versatility across industrial settings.